Diaphragm coil allowance detection
Industry pain points and demands
In the cell lamination process, it is necessary to confirm the diaphragm coil surplus status in real time, and remind to replace the diaphragm coil when it is about to run out to avoid idling. Using deep vision intelligent laser displacement sensor SD33-195, by measuring the thickness of the outer layer of diaphragm core, calculate the diaphragm sheet material allowance.
Advantages & characteristics
01
The SG series has a maximum sampling frequency of 590kHz
02
The static repetition accuracy is 0.02μm
03
Under the same configuration, the cost advantage is obvious
Camera Selection
| Model number | SD33-195-485-VA | ||
| Reference distance (CD) | 195mm | ||
| Measuring range | + / - 99.98 mm | ||
| Light source | Light source wavelength | 655nm | |
| Laser class | Class 2 | ||
| Laser output power | 1mW | ||
| Spot diameter (spot size) | Proximal end | 230 * 600 microns | |
| Reference distance | 430 * 2000 microns | ||
| Distal end | 700 * 3300 microns | ||
Repetition accuracy | 50 microns | ||
| linearity | ±0.1% F.S. | ||
| Temperature characteristic | 0.05% F.S./℃ | ||
| Sampling frequency (Hz) | 500/1000/2000/3000Hz(4 levels optional) | ||
| Input/output | Communication port | 1 RS485 (support ModbusRTU) | |
| Analog output | 1 analog output, analog voltage (0~10V) or analog current (4~20mA) Analog voltage or analog current cannot be switched | ||
| IO input | 1 channel, support laser shutdown, remote teaching, sampling hold, single pulse trigger, return to zero and other functions | ||
| IO output | 1 route, determine the status output | ||
Operating temperature | -10 ~ 50℃ | ||
| Storage temperature | -20 ~ 70℃ | ||
| Working humidity | 35% to 85% no condensation | ||
| EFT protection | Power port 2kV/5 or 100kHz, signal port 1kV/5 or 100kHz, in accordance with IEC 61000-4-4 standards | ||
| ESD protection | Contact discharge is 4kV and air discharge is 8kV, in line with IEC 61000-4-2 standards | ||
| Vibration | 10~55Hz, dual amplitude 1.5mm, 2 hours in X, Y, and Z directions respectively | ||
| Impact | 500m/s ² (approximately 50G), 3 times in X, Y, and Z directions respectively | ||
| IP level | IP67, in accordance with IEC 60529 standard | ||
| Size (mm) | 60*50*22 | ||
| Weight (including cables) | 120g | ||