Enterprise trends
What problems will be encountered in the use of 3D scanners
2021-09-15
Author：
Pageviews：
3D scanner products are relatively common in our lives. If these common problems can be solved in time, they can indeed bring us better protection.
Problem 1: The number of point clouds scanned is relatively small
If this happens, it is best to check the information displayed on some depth camera viewfinder interfaces marked by yellow boxes. If the two kinds of information are different after a simple comparison, it is recommended that you adjust the scanning distance according to the actual situation. The reason why this happens may be because the scanning distance is relatively close, or it is relatively far away.
Problem 2: Tracking loss occurs during scanning
If this happens during the scanning process of the 3D scanner, it may also be caused by the scanning speed being too fast or the movement of the model. It is recommended that you check the scanning speed as much as possible, and you can also aim the scanner at the effectively recognized area, and the identifiable range is basically the same. Continue to scan at an appropriate distance and speed through the scan, so that smooth stitching can be done.
Contact information
Support hotline：400-966-0626
Company headquarters address: 5th Floor, Building 2, Chongwen Park, Zhiyuan, Nanshan District, Shenzhen, Guangdong Province
East China Office: Room 1305, Building 7, Xiangyu Cross-Strait Trade Center, No. 1588 Chuangye Road, Kunshan City, Jiangsu Province
Front Desk (Administration)：0755-86533897
Personnel (application, position): Miss Tang tangling@cnsszn.com
WeChat public account
Enterprise Douyin Number
Shenzhen sincevision technology co.,ltd
All rights reserved©Shenzhen sincevision technology co.,ltd Powered by :300.cn 粤ICP备19013924号 seo tags