图片名称

Enterprise trends

How to maintain china industrial stereo camera

2021-09-15

Author:

Pageviews:


    The china industrial stereo camera is a key component in the machine vision system, and its most essential function is to convert light signals into orderly electrical signals. In the process of using industrial cameras, we cannot use them indefinitely, which will easily reduce product functions and lifespan. So after using it for a period of time, it is necessary to maintain the industrial camera, how to maintain it?

china industrial stereo camera

Maintenance method of china industrial stereo camera

1. Suction method:

This method is to use the suction of the turbo or piston vacuum pump to suck the dust on the surface of the CCD of the industrial camera. The working principle of the china industrial stereo camera is the same as that of the vacuum cleaner used in our home. Therefore, its advantages and disadvantages are also consistent. The advantage of this method is non-contact vacuuming and no damage to the CCD; the disadvantage is that this method only has a suction effect on dry floating dust, but is not very effective on adhesive dust, oil stains, etc.

2. Electrostatic adsorption method:

This method is to use the soft bristles with static electricity to absorb the dust on the CCD surface of the industrial camera. This method has the same advantages and disadvantages as the suction method. When choosing which method to use, it mainly depends on which tool is convenient for collecting materials.

3. Sticky sticky dust method:

This method is to use rubber sticks or low-viscosity gummed paper to stick and remove the dust on the surface of China industrial stereo camera. This method is simple to operate, but the effect is average, and it is easy to leave offset prints that are more difficult to clean after cleaning, causing secondary pollution. Therefore, this method is not recommended.

4. Fiber cleaning method:

This is a method that uses soft microfiber material, dips it in a volatile cleaning solution, and goes deep into the interior of the china industrial stereo camera for cleaning. The volatile cleaning solution mentioned here is preferably pure alcohol with a concentration of more than 90%. Do not use isopropanol. Isopropanol can absorb moisture in the air, and it is easy to leave liquid traces on the surface of China industrial stereo camera during cleaning; It is best not to use methanol, which is a highly toxic substance. The advantages of this method are no damage, easy operation, targeted removal, and certain effect on oily dust. The disadvantage is that if this method is used improperly, it will easily become clearer and dirtier, which is counterproductive.